I have managed to get the printer working.. When i print a test page.. They’re spring loaded so when you close the tray it pushes the contacts together. The question is “how” Could this be the problem or another one could be lying unnoticed Deep inside the printer.. Sometimes it shows up okay, sometimes it doesn’t.. I thought it was the toner cartridges as they were low so i ordered a new set..
|Date Added:||19 September 2013|
|File Size:||48.65 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Sometimes it shows up okay, sometimes it doesn’t. Originally Posted by sonyboy. Problem is, im not a printer technician. The time now is So i made made a copy clf then scanned a newspaper copy to show you how it looks.
When i print a test page. Just an end user and all these gadgets to test i dont have.
My apologies for the poor quality as they were taken during the night from a mere mobile phone. I had to read the whole printer service manual in order to understand where canoon last problem was and finally found it and fixed it.
Any help will be greatly appreciated.
CLC – Support – Download drivers, software and manuals – Canon Emirates
I took a look inside to see where the problem might be, cld. This paper can cause poor contact at J when the duplex drawer is closed.
Page 1 of 2 1 2 Last Jump to page: The only parts that i opened where in the side cover and the problem was with the connection switches that connects the side cover to the printer cnon. I thought it was the toner. Took me a long while but i managed to get it working.
Get the Android App. Unfortunately I do not have a service manual so I cannot troubleshoot. Bookmarks Bookmarks Digg del. If a piece of paper rips during jam removal, it can become wedged in duplex connector J at the rear frame of the machine. The side cover problem is sorted but the printing quality then got cllc.
Inspect J carefully to make certain that no paper is present in the connector. The side cover of the printer seems to have a problem as the printer says the side cover is not closed showing the following error message “Return the fixing Unit to its Original Position” Even when the cover is fully closed it still says the same thing.
Results 1 to 10 of The switches should actuate and deactuate pretty close to the same time. Details vBulletin Mods by vBSocial. They’re spring loaded so when you close the tray it pushes the contacts together.
I have an IRC and the error keeps coming up: If I apply pressure to the top left-hand corner of the side door, the error goes away, but that is tedious if I’m wanting to do a lot of printing. I tried that and i do not see anything out of place. I thought it was the toner cartridges as they were low so i ordered a new set.
The another problem hit in.
Is that black connector cracked at all. The question is “how” Could this be the problem or another one could be lying unnoticed Deep inside the printer.
I have managed to get the printer working.